Spray-Shop Home

Elite Airtight

Elite Airtight

£75.00 per 15 litre tub (£5.00 per litre)
(£90.00 including VAT)


Cost Calculator - Cost your job using Elite Airtight

Airtight Block Walls

Impossible? Difficult? No - Very easy!

AIR FLOW TOO LOW TO DETECT Where the air permeability is less than 0.36m3 /h/m2, no exact value can be obtained due to the resolution of the instrument. This represents very low levels of air leakage and an Air Permeability no greater than 0.36m3 /h/m2.

Elite Airtight easily meets Passivhaus specificiation.

Lab air-tightness test report, data-sheets, etc., available on request

Concrete block walls can leak air into and out of a building at up to 80 cubic metres an hour per square metre of surface. Concrete block walls treated with Elite Airtight are completely airtight.

Imagine the Savings with Elite Airtight!

Elite Airtight provides a cure for the airtightness problems associated with blockwork and allows architects to design cost effective warehouses, distribution centres, schools, sports halls and other large buildings incorporating inexpensive blockwork (where appropriate), while still meeting Part L of the Building Regulations.

Elite Airtight is a unique, specialist coating which reduces airflow through the walls to a rate "too low to detect" and offers benefits which can normally only be attained by expensive and time-consuming plastering procedures.

Elite Airtight can be applied quickly and economically, making it the prefered choice of painters and decorators who have been struggling with the time and expense involved in applying numerous coats of non specialist paints in an attempt to achieve a reasonable finish.

Applying Elite Airtight over large expanses of concrete block ensures considerable savings in the heating and cooling of industrial and commercial interiors.

Specifying Elite Airtight at the planning stage allows standard economical blockwork to be used in the construction of a building but with the added benefit of an airtight, hard wearing, washable and decorative finish.

Also ideal for use in existing properties on brick and block, providing an economical yet significant improvement in the airtightness of the building.

Technical Data

SubstratesBlock walls, brick, concrete, aerated concrete
CoverageTo airtight finish = 1.5m2 per litre
ApplicationAirless spray and back-rolling recommended - see below
Touch Dry15 minutes, drying time 2 hours, recoat after 4 hours

The alternatives to Elite Airtight

  • Plastering - Expensive, time-consuming, messy, requires painting
  • Plaster board - Expensive, time-consuming, not airtight, requires painting
  • Parge Coat - Poor quality surface, not washable
  • Paint - Not airtight unless many coats are applied, unattractive finish
  • Bare block - Not airtight, poor quality surface, unattractive finish, poor light reflectance

Elite Airtight is ...

  • Self priming
  • Excellent adhesion
  • Vapour permeable
  • Washable
  • No residual odour
  • Water based

Elite Airtight is an inexpensive, smart investment which reduces heating and cooling costs in any building with exposed internal concrete blocks, whether previously painted or bare.

Elite Airtight - Method of Application

Spray one coat. Back-roller this coat to cover any visible voids. The coverage, overall and to an airtight finish, is approximately 1.5m2 per litre.

Airless spray recommended with a 21-thou tip




Available on request

How to buy

Call 01429 291301 now

We can spray Elite Airtight for you for at a competitive price



Elite Airtight

100% Airtight coating for block walls



Elite Heritage

Specialist coating for heritage properties


Elite Sealcote

Transparent primer and sealer


Elite Stainblocker

Oil-based permeable stain blocker



Elite Smokote

Specialist coating for fire/smoke damage


Elite Dryfall

Coating for metal surfaces


Elite Aqua Matt

Water-based stain-blocker



Elite Ultra Matt

Water-based coating for mineral tiles


Elite Blackout

Blackout coating for metal surfaces



Cost Calculator

Work out the cost of your job

All prices exclude delivery and VAT.
Delivery to mainland England - Pallet or mixed pallet delivery: Approx £65.00
Individual container delivery: £12.00 per item up to six items, then pallet rates apply. A pallet can hold 33 tubs.
(Sealcote delivery: £12.00 per two 5-litre tubs)
Mainland prices quoted. Delivery to Ireland, Scotland & elsewhere, ask for price when ordering.
Coverage rates are average and depend on type and condition of substrate and skill of applicator.